Technical Data; Options; Accessories - LORCH MF-08 Bedienungshandbuch

13

Technical data

Machine type
Welding
Welding range (12max)
Welding current at ED 100 % 40°C
Welding current at ED 60 % 40°C
Weldable wires steel
Weldable wires aluminium
Weldable wires CrNi
Weldable wires CuSi
Wire feed rate
Mains
Supply voltage U1
Current input I1 (max. current)
Machine
Protection class (in accordance with EN
60529)
Standard
Dimensions and weights
Wire feeder dimensions (LxWxH)
Wire feeder dimensions without han-
dle (LxWxH)
Feeder weight
Standard equipment
Feed unit
Tab. 2: Technical data
ED = Switch-on duration
- 24 -
MF-08
A/V 550
A 400
A 500
Ø mm 0.6...1.6
Ø mm 1.0...2.4
Ø mm 0.8...1.6
Ø mm 0.8...1.2
m/min 2...25
VDC 62
A 3
IP23S
EN 60974-5
mm 575 x 245 x 434
mm 575 x 245 x 380
kg 10.6
Rollers 4
909.2079.9-03
14

Options

Digital Push Pull
‰ For digital control of Push Pull torches as well as for ma-
chines with additional intermediate drive.
Push Pull torch
‰ With torches having a length in excess of 5 m, we recom-
mend the use of a Push Pull torch. This has an additional
feed motor on the front of the torch, to ensure a continu-
ous feed.
Intermediate hose assemblies
‰ Extension between the power source and the wire feeder
of 1 – 20 m.
15

Accessories

Vertical mini trolley MF-08 (KG11)
Order number: 570.3060.0
Vertical trolley MF-08 (KG11)
Order number: 570.3062.0
Accessories
02.20