Inserting The Sound Processor In The M Waterproof Battery - Advanced Bionics CI-5068 Anleitung

• Please note that you may notice a slight sound
quality difference when switching between your
BTE microphone program and your headpiece
microphone program.
• Do not open or close the M Waterproof Battery while
in a water environment.
• Before placing the Naída CI M or Sky CI M in the
M Waterproof Battery, visually inspect the O-Ring seal
to make sure it is placed correctly. Confirm that the
O-Ring is not dry, brittle or dirty. If it is, replace O-Ring
prior to use. If damage to the O-Ring is observed or
suspected, replace prior to resuming use.
Inserting the Sound Processor in the M Waterproof
Battery
The M Waterproof Battery has a lock to make sure the
case is not accidently opened, preventing moisture from
entering the case and damaging the sound processor. The
lock is located on the front of the M Waterproof Battery.
While holding the M Waterproof Battery in one hand,
use your forefinger on the opposite hand to push
the lock button while using your thumb to pull the
lock away from the case.
16