Advanced Bionics CI-5068 Anleitung Seite 10

drying of the sound processor. Wipe the battery case
with a soft, lint-free cloth and air dry overnight.
If water or particle ingress is observed, cease use of
•
the M Waterproof Battery immediately, remove the
processor from the enclosure and place in a drying
system overnight to ensure proper drying of the sound
processor. Wipe the battery case with a soft, lint-free
cloth and air dry overnight.
Following exposure to particulate matter, such as sand
•
or dirt, clean the outside of the case with water and
a dry cloth prior to opening.
The Waterproof Battery and O-Ring should be rinsed
•
and dried following submersion in salt or chlorine
treated water.
• Do NOT store the M Waterproof Battery in direct
sunlight or inside a vehicle during extremely hot or cold
weather. The O-Ring should also not be left in direct
sunlight. To prevent excessive sun exposure, cover
the M Waterproof Battery and O-Ring with a towel.
When sunbathing or after water use, please remove
•
the sound processor from the M Waterproof Battery or
cover the M Waterproof Battery and sound processor
to shade it from direct sunlight and prevent excessive
temperatures.
Do not open or close the M Waterproof Battery while
•
in a water environment.
8