C) Description Of The Buttons (Remote Control) - Sygonix 2266217 Bedienungsanleitung

3. Switch the electric consumer that you want to operate via the
wireless socket off via its mains switch, if it has one.
4. Connect the mains plug of the electrical consumer to the
wireless socket.
5. Switch the electrical consumer on via its mains switch, if it
has one.
6. Now switch the electrical consumer on and off using the re-
mote control. To this end, please refer to the chapter 'f) Func-
tion test' and 'c) Description of the buttons (remote control)'.
To ensure proper functioning, the distance between two
wireless sockets should be at least 1 m.

c) Description of the buttons (remote control)

• Use the switch group selector switch (4) to select one of four
switch groups. Three respective channels are available for
each of the four switch groups. These are switched on indi-
vidually with the three ON channel buttons and switched off
individually with the three OFF buttons (2). Accordingly, the
remote control has twelve channels.
• The channel buttons (2) are divided into two columns:
- Left column = ON
- Right column = OFF
• Using the three upper channel buttons in the left column, you
can activate channels 1 to 3 individually. The power LED (6)
of the wireless socket that has been switched on lights up.
41