Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control Elements
Connection
• Plug the smart socket into a regular grounded mains socket (wall socket) of the public supply
grid. Take note of the behaviour of the indicator lights:
- the System indicator light (4) lights up.
- the Wi-Fi indicator light (5) starts flashing fast.
• The Wi-Fi indicator light indicates the following statuses:
Status
LED Pattern
On
Off
Flashing fast
Without user input the indicator light goes out after 10 minutes. To
continue the setup reconnect the smart socket.
Flashing slowly
Flashing slowly
30s
30s, then quickly
4s
4s on/0.25s off
• Plug the desired load into the receptacle (1) of the smart socket.
Operation
• Press the
button (2) to turn on the power supply to the connected load. The On/Off
indicator light (3) lights up.
• Press the
button again to turn off the power supply to the connected load. The On/Off
indicator light goes out.
Additional functionality is available in connection with the accompanying app. Make
sure to read the app instruction manual.
Resetting
Resetting the smart socket removes all stored settings and re-applies the factory default
settings.
• Switch the smart socket on.
• Long press the
button until the Wi-Fi indicator light (5) goes out, comes on again and
flashes fast.
• The reset procedure is completed.
Maintenance and Cleaning
• The product does not require any maintenance. You should not open/disassemble it. Repair
or maintenance work must be carried out by a specialist.
• Before cleaning, disconnect the product from the power supply. To do this, pull it completely
out of the mains socket.
• Disconnect connected loads.
• Keep the ventilation slots (7) clean.
• You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with a soft,
clean brush and a vacuum cleaner.
1
1 Receptacle
2
button (on/off)
2
3 On/Off indicator light
3
4 System indicator light
4
5
5 Wi-Fi indicator light
6
6 Barcode
7 Ventilation slots
7
When
Connected to WLAN
Not connected to WLAN
- Ready to connect to WLAN, includes:
- deleting the smart socket in the app
- after a reset
- failed to add smart socket to app
- Connecting to WLAN access point
- Permanently failed to connect to
WLAN access point
Incorrect WLAN password
4s
No internet connection
• Do not use aggressive chemical or scouring cleaning agents, as this may lead to discolouration
or changes in the material on the surface.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, herewith declares that this
product conforms to the 2014/53/EU directive.
The full text of the EU declaration of conformity is available at the Internet address
below: www.conrad.com/downloads
Select a language by clicking on the corresponding flag icon, and then enter the
order number of the product into the search box. You may then download the EU
declaration of conformity as PDF file.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
Rated Input ................................... 220 – 240 V/AC, 50 Hz, 16 A
Connection power ......................... Resistive load: max. 3500 W
Inductive load: max. 600 W
(Devices with mainly resistive load are, e.g., light bulbs,
heaters, etc. Powered devices with inductive load are,
e.g., engines, control gears, conventional transformers,
energy-saving bulbs, etc.)
Overcurrent protection .................. 16.8 A (item no. 1557806)
Standby power consumption ........ ≤ 1.6 W
Measuring accuracy ..................... (item no. 1557806)
Range:
Power ≥ 5 W:
1 W ≤ Power < 5W:
Power < 1 W:
WLAN technology ......................... IEEE 802.11 b/g/n, 2.4 GHz
Wi-Fi security ................................ WPA, WPA2, WPA/WPA2
RF output power ........................... IEEE 802.11b: 17 ±2 dBm
IEEE 802.11g: 14 ±2 dBm
IEEE 802.11n: 13 ±2 dBm
Wi-Fi range ................................... 15 m
Protection class ............................ I
Child proof .................................... yes
Operating conditions ..................... 0 to +40 °C, 10 – 90 % relative humidity,
non-condensing
Storage conditions ........................ -10 to +70 °C, 5 – 90 % relative humidity,
non-condensing
Dimensions (W x H x D) ............... 65 x 114 x 38 mm
Weight .......................................... approx. 165 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
0 – 4032 W
tolerance < ±2 %
tolerance < ±10 %
tolerance < ±0.23 W
*1557806_P701A_1557807_P701B_v1_0717_02_jh_m_3L_(8)
Werbung
