Philips Wet&Dry FC6145 Bedienungsanleitung Seite 12

English
12
Put the inner ilter back into the outer ilter (1) and turn it
7
clockwise to lock it (2) (Fig. 21).
Put the ilter unit back into the dust compartment (Fig. 18).
8
Note: Make sure you insert the ilter unit in the correct way.
To reattach the dust compartment, align the slot on the dust
9
compartment with the projection on the appliance. First attach the
bottom of the dust compartment (1) and then push the top of the
dust compartment towards the appliance (2) until it locks into
place ('click') (Fig. 15).
storage
1 You can store the vacuum cleaner and the accessories on the
charger (Fig. 22).
replacement
We advise you to replace the inner ilter after a prolonged period of use
or if you can no longer clean it properly.
Replacing the inner ilter (FC6145/FC6144/FC6140)
Remove the ilter unit from the dust compartment (Fig. 13).
1
Turn the outer ilter anticlockwise (1) and remove it from the ilter
2
holder (2) (Fig. 16).
Gently turn the inner ilter anticlockwise (1) and remove it from
3
the ilter holder (2) (Fig. 23).
Place a new inner ilter on the ilter holder (1) and turn it
4
clockwise to attach it (2) (Fig. 24).
Push the tip of the inner ilter inwards (Fig. 25).
5
Place the outer ilter on the ilter holder (1) and turn it clockwise
6
to attach it (2). (Fig. 17)