Pre-Installation Checklist; Installation Steps - TP-Link Wall-Plate Access Point Installation

English
IP addresses to the EAPs and clients in your local network.
The management host can be in the same or different network
segment with the EAPs.

Pre-Installation Checklist

Before installation, be sure that you have the following items:
• A pre-installed wall junction box
• An RJ45 plug
• A triangular screwdriver
• A Phillips screwdriver
• A PoE switch

Installation Steps

The EAP can be mounted into either an 86mm wall junction box
or a standard EU wall junction box. The junction box should be
pre-installed with a running-in-wall Ethernet cable connected to
a PoE switch.
86mm wall junction box Standard EU wall junction box
7