Troubleshooting; Troubleshooting Table - Sick Gr18 Inox Betriebsanleitung

8

TROUBLESHOOTING

8 Troubleshooting
8.1

Troubleshooting table

10
Table 3: Sensing range setting
The sensor is adjusted and ready for operation.
Figure 5: Detection
The Troubleshooting table indicates measures to be taken if the sensor stops working.
Table 4: Troubleshooting
LED indicator/fault pattern
Green LED does not light up
Cause
No voltage or voltage below
the limit values
Measures
Check the power supply,
check all electrical connec‐
tions (cables and plug connec‐
tions)
8021184.1ABM / 2020-12-21 | SICK
Subject to change without notice