Herunterladen Inhalt Inhalt Diese Seite drucken

Nameplate Ce; To Our Costumers; User's Responsibility; Safety Standards - Gianni Ferrari GTM 155 Technisches Handbuch

Vorschau ausblenden Andere Handbücher für GTM 155:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31

0. NAMEPLAtE CE

1)
Manufacturer's address
2)
Model
3)
Weight
4)
Engine
5)
Construction's year

1. to oUr CostUMErs

We are pleased to welcome you as one of our customers. To ensure best possible performance of your machine
as well as for useful tips for using and maintaining it, we kindly ask you to read through carefully the User's
Manual.
The machine has been designed to give best performance under difficult conditions. Its working performance largely
depends of course on its maintenance. Should queries arise that have not been dealt with in these instructions,
then please contact your dealer who will be able to assist you further.

2. UsEr's rEsPoNsiBiLity

It is imperative that the user reads through this manual carefully so as to become acquainted with its working
procedure, maintenance of parts and proper lubrication according to our instructions.The user is also responsible
for checking, repairing and for possible replacement of wornout parts which could cause injuries.The user is re-
sponsible for damages caused to third parties by improper use. The machine must be used and maintained only
by persons with a good knowledge of its specific features and who have fully understood the safety rules.
Never let children or minors near the machine.
Local laws, if any, may state a minimum age for the operator. Never take passengers.
Only factory approved attachments and accessories are permitted.
It is strictly prohibited to do any alterations or reconstructions to the machine which are not mentioned in this
manual.
WHEN USING THE MACHINE, THE OPERATOR MUST SCRUPULOUSLY OBSERVE THE SAFETY RULES CONTAINED IN
THIS MANUAL, THE RULES FOR THE PREVENTION OF ACCIDENTS, OTHER GENERAL SAFETY RULES, THE PROVISIONS
OF WORK MEDICINE.

3. sAFEty stANdArds

ONLY A CAREFUL USER IS A GOOD USER
If you follow the Safety Instructions in the manual you can avoid accidents.
MAIN PART
1) Read through carefully each section of these instructions.
2) Check the machine before every use for defect, for e.g. loose screws and bolts, loosened or damaged blades
or other parts which are not secure. It is absolutely forbidden to use the machine in improper conditions.
Therefore, before starting your machine go through the control and service instructions as recommended.
3) Before starting the machine acquaint yourself with all the parts and with the checking system.
4) The machine should only be used by adults with experience. Don't let children use it.
Avoid using the lawnmower if you do not feel physically fit for the job.
5) Keep people within a certain security distance as explained hereafter.
6) Only use original parts and accessories. Do not make any changes thereto.
For information, please consult your dealer.
7) Replace lost or damaged safety stickers or warning labels. Chek the list of safety stickers in the "SAFETY PRE
CAUTIONS" section of this manual. Wipe dust and dirt off the stickers.
8) Keep hands and feet, as well as your body away from the moving parts.
9) Never use the machine without protection and covers in the right position and perfect condition.
Do not use the machine if its safety devices are not perfectly efficient.
For no reason, tamper with the machine safety devices.
10) Should an object have been run over or got stuck, stop immediately. Turn off the engine and remove the igni-
tion key. Disengage the P.T.O., put the attachment onto the ground and inspect it. Do not start using the machine
until you are sure that it is in perfect working order.
11) When you have finished working with the machine, disengage the P.T.O., put the attachment lower down so
that it touches the ground, turn off the engine and remove the key.
12) Never start the engine in a closed room. Exhaust fumes are poisonous.
Before carrying out maintenance operations on the machine make sure that the same is off.
16
Downloaded from
www.Manualslib.com
See figure 0.
THIS SIGN IMPLIES THAT SAFETY REGULATIONS MUST BE COMPLIED WITH AT ALL TIMES BY THE
USER SO AS TO AVOID ACCIDENTS. PLEASE, BE CAREFUL WHEN YOU SEE THIS SIGN. IT IS FOR
YOUR AND OTHER PEOPLE'S SAFETY.
manuals search engine

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Gtm 160

Inhaltsverzeichnis