Varian Turbo-V 150 PCB Bedienungshandbuch Seite 52

INSTALLATION
Voltages between controller and power transformer and
transformer and mains are dangerous in case of contact.
Protect adequately the controller and the transformer
installed into the customer system from accidental
contacts.
High voltage developed in the controller can cause
severe injury or death. Before servicing the unit,
disconnect the input power cable.
High temperature developed in the controller can cause
severe injury. Protect adequately the controller from
accidental contacts.
Downloaded from www.Manualslib.com
Interconnection Cable Controller - Pump
Interconnection Cable Controller - Power Transformer
!
WARNING!
!
WARNING!
manuals search engine
NOTE
The controller installed into the customer system must
be positioned so that cold air can flow through the PCB
components.
Do not install or use the controller in an environment
exposed to atmospheric agents (rain, snow, ice), dust,
aggressive gases, or in explosive environments or
those with a high fire risk.
During operation, the
conditions must be respected:
•
temperature: from O °C to +40 °C
•
relative humidity: 0 - 95%
(without conden-sation).
46
INSTRUCTIONS FOR USE
following environmental
87-900-908-01 (C )