Grundig KMP 8650 S Bedienungsanleitung Seite 35

OPERATION _______________________________
4
When the accessory has completely stopped,
unplug the appliance and lift the upper body.
Pause mode
You can press Pause/Start button
ment during operation to pause/start the opera-
tion of the appliance.
The device will stop operating when you press
Pause/Start button
J
display will also stop.
G
The time counting will resume when you activate
the speed adjustment knob
Notes:
• When you move the speed adjustment knob
to "0" position, the LED display
counter will automatically show 00:00.
•
Maximum counting time of the counter is
09:59 (minute-second). It will automatically
be reset when it exceeds this value. You need
to move the speed adjustment button
position and operate it to activate the counter
again. Turn the speed regulator to the left in
order to select the desired speed level.
Counter
•
You can use the counter function especially for
at any mo-
J
. Time counting on the LED
again.
I
of the time
G
to "0"
I
your recipes that require a specific whisking/
blending/kneading duration.
•
Use the time setting buttons
section of the LED display
processing time and operate the appliance.
– When the set time elapses, the LED display
G
light will go off and an audible warning
will be heard. The device will turn off au-
tomatically.
5
To start processing again, you must set the
speed adjustment knob
reset the counter. Turn the speed regulator to
the left in order to select the desired speed
level.
00:45
1
Notes:
I
•
Press and hold the time setting buttons
fast forward minutes and seconds.
• The maximum time you can set is 09:59 (min-
ute-second).
•
You can move the speed adjustment knob
to "0" position to set the counter to 00:00.
at the lower
H
to set the desired
G
to "0" position to
I
Bip
00:00
2
H to
I
ENGLISH 35