Setting - Ravelli Rc 120 Touch steel Bedienungs- Und Wartungsanleitung

COMFORT CLIMA
ENABLE COMFORT
RESTART DELTA
SHUTDOWN DELAY
The first setting allows the activation of the CLIMATE COMFORT function. This function is intended to ensure that the room tem
perature set is maintained steady upon setting the maximum period of "X" minutes (SWITCH-OFF DELA Y: 5 MIN) before switch-ing
to ECO STOP phase. The STOVE maintains this state until the temperature drops below the set value (CLIMATE COMFORT DELTA:
5°C). For example, with the room temperature at 21 ° C, the stove switches of f when this temperature is reached and restarts when
the temperature reaches 16°C (21°C - 5°C). You can also activate the function using an external thermostat, keeping in mind that this
does not include the value of hysteresis.

Setting

Below are the steps to follow, starting from the ome screen, to access the ome menu.
After following the above procedure
MENU
USER
MANUFACTURER
ENGINEER
Press the key "access menu" to
access
the
MENU page
Settings > Enable thermostat
DATE-TIME
ENABLE EXT. T
CONTRAST
FW VERSION
LANGUAGE
Press the "enter" key
to access the
SETTINGS
ENABLE THERMOSTAT
Press the key
"confirm"
to enable the function.
��
In "Home" mode, instead of room temperature measured and settable, appears the line T ON if the room in which the
thermostat is installed has not reached the temperature requested or the writing T OFF if the temperature in the room is
reached.
Use and maintenance manual Rc-Rv 120 Touch steel
COMFORT CLIMA DELTA
Press the key
"confirm"
to access the
USER page
SEASON
ADJUST
Press the key
"selection" to switch to
ENABLE THERMOSTAT.
Press the key for several
times
to return to
"STAND B " page
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
DATE-TIME
ENABLE EXT. T
SEASON
CONTRAST
FW VERSION
LANGUAGE
ADJUST
to access the function
n tand y mode, instead of room temperature measured
and settable, appears the line T
the thermostat is installed has not reached the temperature
re uested or the writing T
room is reached.
Rev.0 18/05/2020
COMFORT CLIMA DELTA
USER
COMFORT CLIMA
SETTINGS
Press the key "selection" for
"selection"
to switch to the second page
of USER MENU and select
SETTINGS.
ENABLE THERMOSTAT
Press the key
"confirm"
if the room in which
if the temperature in the
Pag.38