Time And Date Setting - Ravelli Rc 120 Touch Steel Bedienungs- Und Wartungsanleitung

��
After 5 minutes of inactivity, the handheld display dims to "SLEEP" mode while maintaining the radio connection to the stove.
A subsequent press of the ON/OFF key reactivates the display.
��
The first press of any key with active display turns on its backlight, not interpreting it as a command.
The display is subdivided into three parts:
1- It shows the current room temperature measured by the handheld set. Moreover, if you press the DOWN scroll key you will display
the temperature settings that can be changed using the two UP/DOWN keys. Any change made is confirmed automatically within 3
seconds from the change or by pressing the confirmation key. A sound signal indicates that the change has been confirme
2- Icon indicating the status of the stove (see synthetic phase diagrams).
3- In the inactive phases (combined with the second part of the display) indicates the state of the stove. In the active phases, it
indicates the operating power of the stove. In addition, by pressing the DOWN scroll button, you can display the power settings, that
can be edited using the two scroll keys UP/DOWN: The confirmation of any change takes place automatically within 3 seconds from
the change or by pressing the confirmation key. A sound signal indicates that the change has been confirmed.

Time and date setting

Below are given the steps for accessing the relative menu
Below are given the steps for accessing the relative menu.
MENU
USER
MANUFACTURER
ENGINEER
Press the key "access menu" to
access
the
MENU page
SETTINGS
DATE-TIME
ENABLE EXT. TH.
CONTRAST
FW VERSION
ADJUST
LANGUAGE
Press the key
"confirm" to
access the
SETTINGS
page
Use and maintenance manual Rc-Rv 120 Touch steel
Press the key
"confirm"
to access the
USER page
Press the key "con-
firm"
to access the page
DATE-TIME
Press the increase key to change every single value
Press the increase key to change every single value
Press "confirm" to confirm the settings and switch to the next
value.
By pressing the key "back" for several times you will display
the stand-by page.
USER
SCREW FEEDING
CHRONOTHERMOSTAT
AIR-PELLET SET
STOVE STATE
Rev.0 18/05/2020
Pag.33
USER
COMFORT CLIMA
SETTINGS
Press the key "selection" for
"selection"
to switch to the second page
of USER MENU and select
SETTINGS.