IMOU Cruiser Kurzanleitung Seite 8

5 Rotate the camera counterclockwise until it is locked. Make sure
6
Power on the camera and then adjust its angle properly.
Pole Mount
Note:
1. Make sure that the pole is strong enough to hold at least three times the
weight of the camera and the bracket.
2. The hoops are not provided. Please prepare them in advance.
Thread the hoop through the mounting holes on the bracket, then attach the
1
bracket to the pole.
Align on the top of the camera with
2
together.
Rotate the camera counterclockwise until it is locked. Make sure
3
Power on the camera and then adjust its angle properly.
4
Mounting Bracket
2
Hoop
1
Camera
3
on the bracket, then t the two parts
+60
-30
align with .
align with .
DC
12V1A