WOLFF T-REX Original Bedienungsanleitung Seite 47

4.2 Work cycle
Warning!
Before fitting the plug, make sure the power voltage corresponds to that on the CE marking plate.
Make sure the power plug is correctly fitted in the power socket.
Make sure the flexible hose is properly fitted and locked in the vacuum pipe union.
Make sure the power cable and any extension used are integral and in perfect condition.
Block the vacuum cleaner by means of the retainer provided
Grip one end of the flexible hose complete with selected accessory.
Press the Start button and start vacuuming.
To stop the vacuum cleaner, press the Stop button.
Warning!
Before switching the vacuum cleaner back on, make sure the motors have come to a complete halt.
After finishing work, disconnect the vacuum cleaner from the power socket.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-41 | E-Mail info@wolff-tools.com | Internet www.wolff-tools.com