Description Of Controls - WOLFF T-REX Original Bedienungsanleitung

Fit the supplied pipe in the connector.
Make sure the power supply corresponds to the voltage and frequency indicated on the vacuum cleaner
plate.
Uzin Utz Tools GmbH & Co. KG
| D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 |
Fax +49 (0)7062-91556-41 | E-Mail tools@uzin-utz.com
|Internet www.wolff-tools.de
www.wolff-tools.com
Important!
Do not fit the plug in the power socket with wet hands.
Attention!
In the event of an extension being used, make sure this is in perfect condition, in compliance with CE
standards and with cable cross section suitable for the power input of the vacuum clean
4.1

Description of controls

1
2
3
4
1) START/STOP switch motor 1/2/2
2) Red light - Clogged filter
3) Vacuum meter
4) Green light - Power On
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-41 | E-Mail info@wolff-tools.com | Internet www.wolff-tools.com