Fm Radio Operation - LENCO SCD-720 Bedienungsanleitung

Adjusting the Antenna
The antenna at the rear panel of the unit should be fully extended to ensure a good DAB+ / FM reception. Alter the antenna
position for the best reception.

FM RADIO OPERATION

Auto Scan
1. Turn on the unit in FM mode.
2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).
Manual Scan
1. Press the button repeatedly to tune to a different frequency.
or
2. Alternatively press and hold the
Storing FM Presets
You can save up to 20 FM stations.
To use the unit buttons to store the preset:
1. Tune to the station you wish to store.
2. To save it to the preset 1 or 2 or 3, press and hold the numeric button respectively. Then it will save to that preset number.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button "4". "Store" will be displayed.
4. Press the
or button to select the desired preset number to store.
5. Press the ENTER to store.
To use the remote control button to store the preset:
1. Tune to the station you wish to store.
2. Press and hold the MEMORY button, "Store" will be displayed.
3. Press the
or button to select the desired preset number to store.
4. Press the ENTER to store.
Recall Stored FM Presets
To use the unit buttons to recall the preset:
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button "4". "Recall" will be displayed.
3. Press the
or button to select the desired preset number to recall.
4. Press the ENTER to recall.
To use the remote control button to recall the preset:
1. Press the MEMORY button, "Recall" will be displayed.
2. Press the
or button to select the desired preset number to recall.
3. Press the ENTER to recall.
Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the
switch between stereo audio and force mono audio.
Displaying FM Station Information
There are several types of information as listed below. To change the display information press the INFO button repeatedly.
Radio Text
1. Radio Text: Scrolling text which shows information about music titles or program details provided by the radio
station
2. Program Type (PTY): Type of program provided by the broadcaster
3. Frequency: Current channel frequency
4. Audio Type: Stereo or Mono
OTHER FM MENU OPERATION
Press and hold the MENU button (or press the MENU button on the remote control) to access the menu control. Then press
button for different options as described on next page.
the or
FM RADIO
button to automatically search to the next available station.
or
button on the unit (or MONO/ST. button on the remote control) will
Program Type (PTY)
-12-
REPEAT RANDOM
VOL
DISPLAY
REPEAT RANDOM
VOL
DISPLAY
Frequency Audio Type