Basic Operation; Radio Operation; Cd/Usb Operation - LENCO SCD-550 Benutzerhandbuch

3. DC CONNECTION
For DC operation, firstly remove the AC plug from the AC outlet and disconnect the AC cord from the AC~IN jack. Then
insert 6 pcs size C (UM-2) batteries into the battery compartment.
Since the unit will draw little power consumption even in OFF mode, it is suggested to uninstall the battery when it is not
used for a long time.
EN
UM2 (LR14) C SIZE 1.5V X 6 PCS
'C' SIZE, UM-2 1.5V

4. BASIC OPERATION

Slide the FUNCTION switch to select from "CD/USB/BT/AUX" modes of CD playback / USB playback / Bluetooth or AUX
in. Switch to "FM MONO" for FM radio mono mode and "FM STEREO" for FM radio stereo mode. To turn off, slide it to the
"OFF" position.
Volume Control
Turn the VOLUME CONTROL to change the sound loudness.
Adjusting the Telescopic Antenna
The antenna should be extended to ensure a good FM reception. Alter the antenna position for the best reception.

5. RADIO OPERATION

Slide the FUNCTION switch to "FM MONO" or "FM STEREO" as desired, the POWER Indicator will illuminate.
1.
2. Turn the TUNING CONTROL to your desired radio station.
Always keep the antenna fully extended for best performance. Try to put your unit near an open window until you get the
best reception.
Note:
When you set to "FM STEREO" mode and if you tune to a FM stereo station with good reception, the FM STEREO
-
INDICATOR will turn on.

6. CD/USB OPERATION

Loading and Playing CD Disc
Open the CD door. Install a disc with the CD graphic side facing up. Close the CD door.
After reading the disc the total number of tracks will be shown on the display. It will play the first track automatically.
USB Device Playback (MP3 file only)
Insert a USB device into the USB socket. Press and hold the PLAY/PAUSE button to change it to USB mode.
After reading the total files / folders number will be shown on the display. The unit will play the first track automatically.
EN
UM2 (LR14) C SIZE 1.5V X 6 PCS
'C' SIZE, UM-2 1.5V
7