Listening To The Radio - LENCO SCD-36 USB Bedienungsanleitung

(1) Insert an audio cable(not included) with 3.5mm plugs on each end into the
HEADPHONES jack or LINE OUT jack of your MP3 player or computer,and the other end
into the AUX IN jack of the set.
(2) Connect the supplied AC power cord or batteries.
(3) Slide the FUNCTION switch to CD/USB/AUX IN position.
(4) Turn on your MP3 player or computer,adjust the VOLUME control of the MP3
player/computer and the player to the desired level.
(5) Slide the FUNCTION switch to OFF position after use.
NOTE:
When connecting an audio player to the set while the set is playing CD,the set will exit CD
mode and switch to AUX IN mode automatically.

9. LISTENING TO THE RADIO

(1) Connect the supplied AC power cord or batteries.
(2) Slide the FUNCTION switch to RADIO position,the POWER lamp will turn on.
(3) Slide the FM MONO/STEREO switch to the proper position that you want.
(4) Tune into the station you prefer using the TUNING control.Adjust for the clearest
sound.
(5) Adjust the VOLUME control to your preference.
(6) Slide the FUNCTION switch to OFF position to turn off the radio.
NOTE:
Next time you want to listen to the radio,just slide the FUNCTION switch to RADIO
position.The player automatically starts playing the previously tuned station.
To improve broadcast reception
Change position of the antenna for FM
8