Inhaltsverzeichnis; Safety Instructions; Important Safeguards; Cleaning - Canon Multi Function Professional Puncher – A1 Bedienungsanleitung

TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
Important safeguards
Cleaning
Service
Safety messages
2. INTRODUCTION
3. QUICK START GUIDE
4. USER OPERATIONS

1. SAFETY INSTRUCTIONS

THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO
CANON CORPORATION. IMPORTANT SAFETY MESSAGES AND
INFORMATION ARE CONTAINED IN THIS SHEET AS WELL AS ON
THE MACHINE ITSELF. PLEASE MAKE SURE YOU CAREFULLY
READ AND UNDERSTAND ALL OF THESE BEFORE OPERATING
THE MACHINE.
THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY
MESSAGE IN THIS
MANUAL. THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD HURT YOU
OR OTHERS.
THE FOLLOWING PICTORIAL IS FOUND ON THE PROFESSIONAL
PUNCHER:
This safety symbol means that you might
get seriously hurt or killed if you open the
product and expose yourself to hazardous
voltage. NEVER remove the screwed on
covers.
requirements
personnel.
Multi Function Professional Puncher - A1
OPERATION INSTRUCTIONS
ALWAYS refer service
to qualified service
3 5. USER DISPLAY
3 6. PROBLEM SOLVING
3 7. SPECIFICATIONS
4 8. DIE SET USER MANUAL
4
4
5
6

Important safeguards


Use the Professional Puncher only for its intended purpose of
punching paper
specifications.

Retain this Operation Instructions manual for future use.
CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT
CUT OFF POWER FROM THE PUNCH.

The Professional Puncher must be connected to a supply voltage
corresponding to the electrical rating of the machine operation
instructions (also listed on the serial number label).

The grounding plug is a safety feature and will only fit into the
proper grounding-type power outlet. If you are unable to insert the
plug into an outlet, contact a qualified electrician to have a suitable
outlet installed.

Do not alter the plug on the end of the cordset (if provided) of the
Professional Puncher. It is provided for your safety.

Unplug the Professional Puncher before moving the machine or
whenever the machine is not in use for an extended period of
time.

Do not operate the Professional Puncher if the machine has a
damaged power supply cord or plug. Do not operate the machine
after any malfunction. Do not operate the machine in case of liquid
spills, or if the machine has been damaged in any other way.

Do not overload electrical outlets beyond their capacity. To do so
may result in fire or electrical shock.

Cleaning


You may clean the exterior of the Professional Puncher using a
soft, damp cloth.

Do not use detergents or solvents as damage to the machine may
occur.
and covers according to
EN
7
10
10
11
the indicated
3