Kaiser S 4581 XL-Serie Gebrauchsanweisung Seite 36

3
Downloaded from DishWasher-Manual.com Manuals
36
Downloaded from www.Manualslib.com manuals search engine
The rinse aid dispenser 1 has six settings.
Always start with the dispenser set on „1".
If spots and poor drying are problems, increase the
amount of rinse aid dispensed by removing the
dispenser lid and rotating the dial to „2".
1
If the dishes still are not drying properly or are
spotted, adjust the dial to the next higher number
until your dishes are spot-free.
We recommend setting on „4".
If the water isn't too hard, you may also prevent
the formation of deposits by adding rinse aid.
The amount of rinse aid needed can vary due to
differences in water hardness. To determine the
water hardness in your area, contact your local
water utility or area water softening company.
When to Refill the Rinse Aid Dispenser
The black dot 2 on the rinse aid dispenser
indicates the amount of rinse aid in the dispenser.
As the rinse aid diminishes, the size of the black
dot decreases, as illustrated below:
2
You should never let the rinse aid get below 1/4
full.
Full
3/4 Full
1/2 Full
1/4 Full - Should refill to eliminate spotting
Empty
The rinse aid should be added, when the Rinse aid
warning light 3 on the information display goes on.
EN