Installation; Built-In The Dishwasher Into The Cabinet - Kaiser S 4581 XL-Serie Gebrauchsanweisung

1
2
* – S 4581 XL
* * – S 6081 XL
Downloaded from DishWasher-Manual.com Manuals
12
Downloaded from www.Manualslib.com
80
100
450*
600**
manuals search engine

INSTALLATION

Place the dishwasher close to the water supply
and sewerage inlets as well as to the electrical
outlet.
Once the appliance is positioned, level the
dishwasher by adjusting the feet 1 (screw in or
out). The inclination angle must not exceed more
than 2°.
The dishwasher is equipped with water inlet and
drain hoses which can be fixed on the right or on
1
the left to enable proper installation.
BUILT-IN THE DISHWASHER INTO THE
CABINET
Before installing the dishwasher, carry out the
following preparatory steps:
Make sure you have enough space to install the
appliance and to connect the water inlet and drain
hoses as well as the electrical cord 2.
The installation space measurements are given in
820
mm.
EN