Troubleshooting - Samsung SDP-760 Benutzerhandbuch

TrouBLeSHooTinG

No video is displayed.
Displayed screen is out of focus.
USB communication with the PC
fails.
Downloaded from www.Manualslib.com
Problem
Check if the resolution of the output device matches with the presenter.
Ex) If the projector's highest video mode is SVGA and the presenter's output resolution has
been set to XGA or SXGA, no image will be displayed on the screen.
y Check if the output device has set a proper input source.
y Check if brightness and focus are adjusted properly.
y Check if video cable is properly connected to output port.
y Check if the OUTPUT MODE is set to VGA / USB.
y Check if the subject is too close to the lens module.
y Check if the SDP program is installed on your PC properly.
y Check if the operating system is Windows XP or Mac OS X 10.5.8 or later. A lower
version of Windows may cause a trouble.
y For further information, refer to the software user's manual (for Windows / Macintosh)
provided with the product.
manuals search engine
Solution
_27
English