appendix
TROUBLESHOOTING
Problem
No video is displayed.
USB communication with the PC
fails.
The remote control does not
operate properly.
48_
appendix
Check if the resolution of the output device matches with the presenter.
(If the projector supports VGA, for instance, and the presenter has set the resolution
to XGA or SXGA, no image will be displayed on the screen.)
Check if the output device has set a proper input source.
Check if the SDP-960 program is installed on your PC properly.
Check if there is a problem with your operating system of Windows XP. A lower
version of Windows may cause a trouble.
For more details, refer to the provided user manual of the software program.
Check if the USB MODE is set to IMAGE.
Check if the remote control runs out of battery, and replace the battery if
necessary.
Solution