setup & application
Setting the protocol
Select the protocol appropriately for communicating with other devices.
1. From the menu, select ConfiGurATion proToCoL.
2. Press
J
`
Setting the C-viDeo
Use this mode to match the output signal between connected device and C-VIDEO.
1. From the menu, select ConfiGurATion C-viDeo.
2. Press
22_
setup & application
Downloaded from
www.Manualslib.com
preSenTer ConfiGurATion
FREEZE
USB TWAIN
PROTOCOL
C-VIDEO
SYSTEM INFO. }
SYSTEM RESET }
RETURN }
to select 10ByTe or 6ByTe.
The selected protocol will be applied after exiting the menu by SAVE AND EXIT.
preSenTer ConfiGurATion
FREEZE
USB TWAIN
PROTOCOL
C-VIDEO
SYSTEM INFO. }
SYSTEM RESET }
RETURN }
to select nTSC or pAL.
manuals search engine
ALL DISPLAY
DISABLED
10BYTE
NTSC
ALL DISPLAY
DISABLED
10BYTE
NTSC