setup & application
Setting the mask
You can mask a portion or the whole of the screen so that it is hidden.
1. From the menu, select imAGe ADJuSTmenT mASK SeTup.
2. Select mASK SeTup to display the sub menu items.
• BOUNDS : With BOUNDS, select the display device currently using.
Press [►] button to select BOUNDS mode in the order of <VGA/USB C-VIDEO>.
• TONE : Select a tone level.
Each time you press [►], the tone value will switch to <LEVEL 1-2-3-4>. The lower the level is, the
greater the transparency of the masking area becomes.
• WIDTH : Select a mask width.
Press [◄] or [►] button on the control panel to set the area between 1~100.
• HEIGHT : Select a mask height.
Press [◄] or [►] button on the control panel to set the area between 1~100.
M
`
`
18_
setup & application
Downloaded from
www.Manualslib.com
mASK SeTup menu
BOUNDS
TONE
WIDTH
HEIGHT
RETURN }
When the mask setting is completed, press the
right buttons to move the masking area.
Note that the mask WIDTH/HEIGHT value is not absolute value but relative and proportional to the width/height of the
video in applicable aspect ratio, which will differ from resolution setting.
manuals search engine
VGA/USB
LEVEL 4
··· * ··· ··· ··· 25
··· * ··· ··· ··· 25
button on the control panel to activate it. Use the left/