Herunterladen Inhalt Inhalt Diese Seite drucken

Hama AUX-IN Bedienungsanleitung Seite 4

Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

Note
• For some vehicle types, the ignition has to be switched on to
supply power to the 12 V car socket. For more information,
please refer to your vehicle's operating instructions.
• Disconnect all cable and on-board connections after use.
6.1 Audio playback
(via USB stick)
• Plug the USB stick into the USB socket marked with
playback will start automatically.
Note
• The capacity of the USB stick must not exceed 32 GB.
• The following formats are supported for audio playback:
MP3.
6.2 Manual station search
• Search for an available frequency on your car radio (static
without partial signals).
• Set the same frequency on the FM transmitter. To do this, press
and hold the
button (5) for 2 seconds until the frequency
indicator on the display (3) begins to flash.
<
>
• Then press the
or
• The FM transmitter always stores the last frequency set.
Note – Automatic standby
• After 50 to 60 seconds without a music signal or button
being pressed, the FM transmitter switches to standby.
• If it receives a music signal or a button is pressed, the FM
transmitter is activated again.
6.3 Charging function
The FM transmitter has a USB charging socket. This supplies the
charging currents specified in Point 7. 'Technical specifications'.
Note – Car battery
With some vehicles, it can happen that power continues to
be supplied even though the ignition has been switched off.
Therefore, when not using the product, disconnect it from the
power supply to protect your car battery from discharge.
button to set the desired frequency.
Note – Connecting terminal devices
• Before connecting a terminal device, check whether the
power output of the charger can supply sufficient power
for the device.
• Ensure that the total power consumption of all connected
terminal devices does not exceed 1000 mA.
• Please refer to the instructions in the operating manual of
your terminal device.
• Disconnect all cable and mains connections after use.
(2);
7. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents.
Note
Disconnect the device from the power supply before cleaning
or if it will not be used for a long period of time.
8. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty
for damage resulting from improper installation/mounting, improper
use of the product or from failure to observe the operating instruc-
tions and/or safety notes.
9. Technical Data
Input voltage
Input current
Output voltage and current
on USB 1
(marked with symbol)
Output current, USB 2
(marked with
FM transmitter
12 – 16 V
0.8 A
5 V
1 A
No charging function;
suitable for USB sticks
symbol)
only
3

Quicklinks ausblenden:

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

00014163

Inhaltsverzeichnis