Inhaltsverzeichnis
Werbung
Störung
MSP Slave
PCB Test
Field Test
Test Flags
Software wdt
Hall Sensor Left
Hall Sensor Right
Throttle Left
Throttle Right
R-net Trip Code
48
Ursache
Communication
Problem
Factory test failed.
Field test failed
(Calibration).
One or more test flags
not set.
Software Watchdog
The left sensor is faulty.
The right sensor is
faulty.
The left throttle is
faulty.
The right throttle is
faulty.
There is an R-net Trip
Code
Erforderliche Maßnahme
Connection with the PC
(Configurator program)
went wrong. Update
Firmware or update
Configurator Software. Try
again.
A fault occurred during
factory testing.
A fault occurred during field
testing (Calibration).
Redo tests and/or replace
PCB.
Update Firmware
Replace PCB
Replace sensor and
calibrate.
Replace throttle and
calibrate.
Check R-net fault on
joystick display or in the R-
net PC Programmer
Werbung
Inhaltsverzeichnis
