Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Door reversibility
Before carrying out any operations, remove the
plug from the power socket.
To change the opening direction of the door,
proceed as follows:
•
To carry out the following operations, we suggest
that this be made with another person that will
keep a firm hold on the doors of the appliance
during the operations.
•
Open the door with the appliance in the upright
position. Unscrew the screws and remove the
door plastic trim.
•
Remove the little plastic cover from the door
plastic trim and refit on the opposite side (d).
•
Lay down the appliance back side down.
•
Remove the plastic hinge covers dx and sx (3).
•
Unscrew the upper hinge and remove it (1-2)
•
Unscrew the screw and remove the door stopper
(4).
•
Remove the door
•
Remove the ventilation grill (D).
•
Using a 10 mm spanner, unscrew the hinge pin
(E) and reassemble it on the opposite side of the
hinge;
•
Screw down the bottom hinge (E) on the opposite
side by using the screws previously removed.
•
Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
•
Re-assemble the ventilation grill (D).
•
Reinsert the door .
•
Pay attention that the front board of the doors are
parallel to the front board of the top.
•
Fix the door stopper on the opposite side (4).
•
Position and fix the upper hinge on the opposite
side (1-2)
•
Reinsert the 2 plastic hinge covers (3).
•
Lift up the appliance to vertical position.
•
Open the door and reposition the upper door
plastic trim with screws.
•
Fix the handles on the opposite side, insert the
plastic plugs into the holes left open that can be
found in the instruction for use bag.
3
2
1
4
E
E
F
D
F
F
F
35
Werbung
Kapitel
Inhaltsverzeichnis
