Comfort Heat Comfort WiFi Handbuch Seite 5

Term. 1: Neutral (N)
Term. 2: Live (L)
Term. 3-4:Output, max. 16 A
5. MOUNTINg ThE ThERMOSTAT
Mount the thermostat in the wall socket (Pic. 3).
1.
2. Fit the frame and carefully press the cover onto the thermostat - starting
with the upper part of the cover, then the lower part of the cover. Ensure
that both the power slide button on the cover and the power switch pin in
the thermostat are down (Pic. 4).
3. Click the cover into place by applying light, even pressure.
WARNINg! Do not apply pressure to the corners of the display cover or to the
display itself. DO NOT open the thermostat by releasing the four fixing clips on
the back.
6. OPERATINg ThE ThERMOSTAT
There is an ON/OFF switch on the left side of the thermostat: up is ON - down is
OFF. The resistive touchscreen requires a soft tap with your fingertip to register
the touch.
Installer Wizzard: The first time the thermostat is connected, push the power
slide button to On "I" The Installer Wizard on the touchscreen will guide you
through the set up of::
1. Region
2. Language
3. Date
Term. X: Do not connect
Term. 5-6: External floor sensor.
4. Time
5. Floor Type
5