Installation; Safety Instructions; Package Contents - i-tec ADVANCE-Serie Gebrauchsanweisung

Installing the USB HUB (USB 3.0 ports type A) is automatic from the system. This HUB will be
automatically detected and installed immediately after connecting to the USB port on your laptop/PC
or PCIe expansion card with internal USB 3.0 host controller.

INSTALLATION

Windows, Mac and Linux: This HUB and the audio adapter will be detected automatically and the
drivers for USB 3.0 ports and the audio adapter will be installed automatically immediately after
connecting to the USB port of your notebook / PC.

SAFETY INSTRUCTIONS

Keep this equipment away from fire, high humidity and temperature.
Keep this User's Manual for future reference.

PACKAGE CONTENTS

i-tec USB 3.0 Metal HUB 3 Port with Audio Adapter with built-in cable (20 cm)
Quick Installation Guide
FAQ
Question: My computer cannot detect the device, or the HUBs function is limited.
Answer: Check drivers of USB 3.0 interface on your computer. These drivers must be up-to-date.
For further information check our website (section USB 3.0 PROBLEMS)
Question: Can I obtain more detailed information about problems with the device?
Answer: Of course, you can contact our technical support on website www.i-tec-europe.eu.
Downloaded from www.Manualslib.com manuals search engine
User's guide
EN
06