Installation In Windows, Macos, Linux, Android, Chromeos - i-tec C31HUBMETAL703 Handbuch

Quick Start / USB-C Charging Metal HUB 7 Port / English

INSTALLATION IN WINDOWS, MACOS, LINUX, ANDROID, CHROMEOS

The HUB installs automatically from the system and requires no drivers.
Connect the HUB with a USB-C cable to an available USB-C port on your
device.
DESCRIPTION
1. 1x integrated USB-C cable to connect to the device (30cm)
2. 1x USB-C port to connect additional power for HUB up to 15W (5V/3A)
3. USB HUB power LED indication
4. 7x USB-A 3.2 Gen 1 port with fast charging support (BC 1.2)
POWER
In case of connecting highly power-hungry devices (e.g. external drives,
mobile phones, etc.) it is important to plug in a USB-C (max. 5V 3A) power
adapter or connect the HUB via USB-C to a free USB port on your device.
Adapter - not included. Otherwise, the USB port of the device may not be
able to supply enough power needed to operate these devices.
CHARGE
The HUB supports charging of connected USB mobile devices such as
smartphones (including iPhones and Samsung phones), e-book readers,
media players, navigation devices and tablets. The HUB does not support
charging of iPad and Samsung tablets, which require special identification
circuits. Simply connect the device to be charged with the original cable to
the USB port of the HUB.
Note: All USB 3.2 Gen 1 ports support fast charging (BC 1.2), but only 1
device can be charged this way.
To use Fast Charging, you need to connect a USB-C power adapter to the
USB HUB.
EN | 6