Topcom TWINTALKER 1302 Bedienungsanleitung Seite 8

TOPCOM TWINTALKER 1302 DUO COMBI PACK
14.6 MONITOR
You can use the MONITOR feature to check for weaker signals in the current channel.
• Press
• Press and hold
until you press
14.7 CHANNEL SCAN
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
SC
TX RX
14.8 BUTTON LOCK
SC
TX RX
14.9 CALL TONES
A call tone alerts others that you want to talk.
a. Setting the Call Tone
SC
TX RX
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
14.10 KEY-TONE ON/OFF
When a button is pressed, the unit will beep briefly.
SC
TX RX
8
Downloaded from www.Manualslib.com
button for normal monitoring .
. After 5 seconds you can release the button. You are now continuous monitoring the channel
again.
• Press and hold and
• Release the buttons.The channel on the display changes as it scans through the channels.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear the
active signal.
• When an active signal (one of 8 channels) is detected, press
and continue to search for another active channel
• Press to communicate through the active signal channel or press
PTT
scan.
• Press and hold for 2 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON
LOCK icon is displayed on the LCD Screen.
• Press and hold again to deactivate BUTTON LOCK
5 different Call Tones can be selected.
• Press 2 times. CA will be displayed.
• Press or to select another call tone or select OF to enable call tones.
• Press to confirm your selection and return to the standby mode.
PTT
To set the key-tone.
• Press 3 times. 'to' will be displayed.
• Press to enable (ON) or
• Press to confirm your selection and return to the standby mode.
PTT
manuals search engine
for 2 seconds.
disable the key-tone (OF).
or to bypass the current channel
to deactivate channel
TOPCOM TWINTALKER 1302 DUO COMBI PACK