Technical Data - LD Systems STINGER MIX G3 Serie Bedienungsanleitung

TECHNICAL DATA

Model number:
Product type:
Type:
Woofer size:
Woofer size:
Woofer magnet:
Woofer brand:
Woofer voice coil:
Woofer voice coil:
Tweeter size:
Tweeter size:
Tweeter magnet:
Tweeter brand:
Tweeter voice coil:
Tweeter voice coil:
Dispersion angle (H x V):
Frequency response:
Amplifier:
Amplifier power (RMS):
Amplifier power (peak):
Max. SPL:
Protective circuitry:
Mixer
Channels:
Microphone input channels:
Microphone input connections:
Microphone input channel controls:
Line input channels:
Line input channel connections:
Line input channel controls:
Monitor line-outs:
Monitor line-out connection:
Monitor line-out controls:
Monitor line-out max output:
Subwoofer line-outs:
Subwoofer line-out connection:
Subwoofer line-out controls:
Subwoofer line-out max output:
Speaker output:
Speaker output connection:
DSP digital effects processor
DSP number of programmes:
DSP controls:
DSP display elements:
Footswitch connection (DFX Mute):
Footswitch connection type:
Footswitch type:
LDMIX102AG3
PA speaker with built-in mixer and Bluetooth
active
10"
254 mm
Ferrite
custom-manufactured
2"
50.8 mm
1"
25.4 mm
Ferrite
Celestion
1"
25.4 mm
80° x 70°
65 Hz–20,000 Hz
Class D
2 x 200 W
2 x 400 W
124 dB
limiter, short circuit, voltage surge protection, overload, overheating
7
3 (switchable 48V phantom power)
XLR/6.3 mm jack (combo)
EQ High, EQ Low, DFX send, Level,
Hi-Z switch (channel 1 only, 1 MOhm), +10 dB switch
2
1 x 3.5 mm stereo jack
2 x XLR/6.3 mm jack (combo)
Level
1
3-pin male XLR (balanced)
Monitor level
17 dBu
1
3-pin male XLR (balanced)
Sub level
17 dBu
1
speakON-compatible connection (200 W RMS, min. impedance 4 Ohms)
16
presets, DFX return, mute switch
Peak LED
1
6.3 mm jack
normal open contact (pnp)
11