Replacing The Fuse; Technical Specifications - EuroLite LED FX-250 RGBW DMXFlower Effect Bedienungsanleitung

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Number of LEDs:
Beam angle of RGB LEDs:
Beam angle of white LEDs:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 11.07.2008 ©
230 V AC, 50 Hz ~
20 W
6
3-pin XLR
: 45° C
a
(steady state): 90° C
C
0.5 m
0.5 m
F 0.5 A, 250 V
156 (48 red, 36 green, 36 blue, 36 white)
20°
30°
330 x 230 x 230 mm
5 kg
23/43 00033218.DOC, Version 1.2