Signalling; Technical Specifications - SimonsVoss SmartRelais 2 Kurzanleitung

6. Signalling

IMPORTANT
Danger of short circuit due to missing seal
The cable entry of the WP version of the SmartRelay 2 is not sealed.
Water can enter.

4. Connect the power supply.
5. Actuate an identification medium to test the function.
9
6 Signalling
Signalling
Constantly (blue)
1 x briefly (red)

7 Technical specifications

Housing
Material
28 / 112
Seal the cable entry yourself with a suitable sealant (e.g. vinegar-
free cross-linking silicone).
You have installed the SmartRelay 2.
ABS plastic, UV-stable
Meaning
Identification medium accepted, relay
contacts are currently connected
Identification medium not authorised
SmartRelais 2
EN