Unpacking Instruction; Control Elements - Fenton MDJ200 PARTY STATION Bedienungsanleitung

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.

CONTROL ELEMENTS

1. USB Input
Connect your USB devices to this slot to play music with MP3-format
2. SD/MMC Input
Connect your SD/MMC devices to this slot to play music with MP3-format.
3. Master Volume
Turn to adjust the "master volume" (output level) of the sound box.
4. Microphone Input 1
6.3mm (1/4") jack for connecting microphones.
5. Microphone Input 2
6.3mm (1/4") jack for connecting microphones.
6. Microphone Volume
Turn to adjust the Microphone Volume.
7. Microphone Echo
Turn to adjust the Microphone Echo.
8. Equalizer Button
Press to adjust the bass and treble.
9. Previous
Press shortly Previous song or press above 3 seconds for fast backward.
10. Next
Press shortly for the next song or press above 3 seconds for fast forward.
11. Input Selector
Press to select the input USB / SD / BT or Line.
12. Play/ Pause
For switching between play and pause
13. Mute Button
Press the button to mute the volume, and press the button again to restore the volume.
CONNECTING WITH BT-DEVICE
1.
2.
3.
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10meter without any barrier.
.
Activate the BT-function on your device (Mobile phone, tablet etc.) which you want to play the
music. See the operating instructions for that device.
Press the "MODE" button and activate BT-function of sound box.
Select "FENTON" on your BT-device and make the BT-connection.
3