Climate Range; Locks; Freon-Free; Product Features - Candy MINI CITY COMBI M. Bedienungsanleitung

Climate Range

The information about the climate range of the
appliance is provided on the rating plate. It
indicates at which ambient temperature (that is,
room temperature, in which the appliance is
working) the operation of the appliance is optimal
(proper).
Climate range Permissible ambient temperature
SN
N
ST
T
Note ： Given the limit values of the ambient
temperature range for the climate classes for
which the refrigerating appliance is designed and
the fact that the internal temperatures could be
affected by such factors as location of the
refrigerating appliance, ambient temperature and
the frequency of door opening, the setting of any
temperature control device might have to be
varied to allow for these factors, if appropriate.
If the power cable is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.

Locks

If your Refrigerator is fitted with a lock, keep the
key out of reach and not in the vicinity of the
applianceto prevent children being entrapped.
When disposing of an old Refrigerator, break off
any old locks or latches as a safeguard.

Freon-free

The freon-free refrigerant (R600a) and the
foaming insulation material (cyclopentane) that is
environmentally friendly are used for the
refrigerator, causing no damage to the ozone
layer and having a very small impact on the global
warming. R600a is flammable, and sealed in a
refrigeration system, without leakage during
normal use. But, in case of refrigerant leakage due
to the refrigerant circuit being damaged, be sure
to keep the appliance away from open flames and
open the windows for ventilation as quickly as
possible.
8
from +10°C to +32°C
from +16°C to +32°C
from +16°C to +38°C
from +16°C to +43°C

Product features

No
1
2
3
4
5
6
7
Due to technological innovation, the descriptions
of the product in this manual may not be
completely consistent with your refrigerator.
Details are in accordance with the material item.

Preparations for use

Installation location

1. Ventilation condition
The position you select for the refrigerator
installation should be well-ventilated and has less hot
air. Do not locate the refrigerator near a heat source
such as cooker, boiler, and avoid it from direct
sunlight, thus guaranteeing the refrigeration effect
while saving energy consumption. Do not locate the
refrigerator in the damp place, so as to prevent the
refrigerator from rusting and leaking electricity. The
result of the total space of the room in which the
refrigerator is installed being divided by the
refrigerant charge amount of the refrigerator shall
not be less than 8 g/ M 3 .
Note: The amount of refrigerant charged for the
refrigerator can be found on the nameplate.
Description
Thermostat
Fridge glass shelf
Crisper cover
Crisper
Freezer drawer
Leveling foot
Bottle rack