Kessel Ecoguss DN 70 Anleitung Für Einbau, Bedienung Und Wartung Seite 14

Installation instructions
Installation sketch:
①
①
②
Note:
Ensure that the bosses are positioned on the seating/substructure and the
① ②
screws are tightened with a torque of max. 20 Nm.
The pressure seal flange must be installed so that the top of the pressure seal flange
is flush with the top of the substructure.
If a space exists between the boss and seating/substructure it must be remo-
① ②
ved.
6