Connection Of External Devices; Cleaning And Maintenance - AEG MC 4459 BT Bedienungsanleitung

English
38
Further more, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.

Connection of external devices

USB Connection (7)
This device has been developed in accordance with the
latest technical developments in the USB field. Unfortunately
the large number of different types of USB storage media on
offer today makes it impossible to guarantee full compatibil-
ity with all USB storage media. For this reason there may be
problems in rare cases with playing back from USB storage
media. This is not a malfunction of the device.
1. Press the SOURCE button (6/8) until USB shows in the
display. Alternatively you can also press the USB button
(18 on the remote control) to select USB mode.
2. Insert a USB storage medium directly into the corre
sponding connection.
3. "USb" appears briefly on the display. The number of
folders and titles are then displayed.
4. Playback then begins. The current track, MP3 and the
elapsed playing time is shown on the display.
For operating instructions please see the section "Playing
CDs/MP3s".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Before you remove the USB storage medium, use the
SOURCE button to switch the unit to RADIO or CD.
AUX IN jack (8)
Connect analogue playback devices. When connecting to
this jack you may also listen to the audio of other devices,
such as MP3 or CD players etc., via the speakers.
1. Please connect the external device via 3.5 mm plug jack
to the AUX jack.
2. Now use SOURCE button (6/8) to select LINE IN mode.
3. You can hear the sound from the external device through
the loudspeakers. You can use the VOL+/VOL- buttons
(10/5) to adjust the volume. The CD buttons are not ac-
tive.
4. For further functions please refer to the user manual of
the external audio device.
NOTE:
Set the volume of the external device to a proper audible
level.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
CD jumps during Check the disc for
playback. fingerprints, dirt
or scratches.
The device can- The device is
not be operated. blocked, i.e.
"stuck".
No audio signal Device has not
during Bluetooth been registered
connection with the audio
source.
Volume too low
Bluetooth con- Device is not in
nection cannot PAIRING mode.
be established
Registration
doesn't work
Audio source is
turned off
Bluetooth is
turned off on the
audio source.
Bluetooth version
is not supported.
Solution
Ensure that the disc is
inserted with the label
facing upwards.
Check the disc for
fingerprints, dirt or
scratches.
Remove the mains
plug for approxi-
mately 5 seconds.
Then turn the device
on again.
Restore factory set-
tings. See page
35 "Restore factory
settings"
Check whether there
is a connection.
Reregister the device
with the audio source,
if necessary.
Increase the volume
on the device.
Increase the volume
on the audio source.
Keep the
button
pressed for approx.
4 seconds. Try to
reconnect the devices
with each other.
Check, whether the
audio source supports
the A2DP protocol.
Turn the audio source
on
Turn on the Bluetooth
function on the audio
source.
Use a different play-
back device.