Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions; Maintenance - Hitachi E10U Handbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
English
TROUBLESHOOTING
Lots of failures are caused by insufficient inspection or unfamiliar handling. Upon failure, inspect in the following
procedure. If any fault persists, contact the authorized HITACHI Service Center.
●The engine fails to star
● There is no fuel.
● The fuel pipe is clogged.
● The fuel strainer is clogged.
● The carburetor is clogged.
● The spark plug is dirty.
● The electrode gap of the spark plug
is incorrect.
● The engine oil is insufficient.
●Inspection of other parts
● The AC or DC protector is turned
off.
● The total power consumption of
the connected electric appliances
exceeds the operating range of the
generator.
● There is poor contact between the
plug and outlet.

MAINTENANCE

IMPORTANCE OF MAINTENANCE
Good maintenance is essential for safe, economical, and trouble-free operation. It will also help reduce air
pollution.
WARNING: Improper maintenance or failure to correct a problem before operation can cause
MAINTENANCE SAFETY
WARNING: Always follow the procedures and precautions in the owner's manual. Failure to properly

SAFETY PRECAUTIONS

CAUTION: Make sure that the engine is off before you begin any maintenance or repairs.
18
Downloaded from
www.Manualslib.com
Cause
● l Supply fuel.
● Clean the fuel pipe.
● Change the fuel strainer.
● Clean the carburetor.
● Clean the spark plug and dry it.
● Adjust the electrode gap to the
correct state.
● Supply engine oil.
Cause
● Turn on the AC and DC protectors.
● Use only electric appliances so
that the power consumption is
contained in the operating range of
the generator.
● Securely insert the plug of the
electric appliance into the outlet.
malfunction, serious injury, or death. Always follow the inspection and maintenance
recommendation and schedules in this user's manual.
The following pages include a maintenance schedule, routine inspection procedures, and
simple maintenance procedures using basic hand tools, to help you properly care for your
generator. If you are not comfortable with any maintenance procedure, have the generator
serviced by a professional technician.
Maintenance, replacement, or repair of the emission control devices and system may be
performed by any engine repair establishment or individual, using parts that are "certified"
to EU standards.
follow maintenance instructions and precautions can lead to serious injury or death.
This will eliminate several potential hazards, including:
manuals search engine
Remedy
Remedy

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis