Specifications; Transporting / Storage; Applications; Preparation Before Operation - Hitachi E10U Handbuch

SPECIFICATIONS

Item
Model
Excitation method
Voltage regulation method
Rated frequency
Max. output
Rated output
Rated voltage
Power factor
Rated output
Rated voltage
Rated current
Alternating current
Direct current
AC/DC overcurrent protector
Name
Type
Total displacement
Max. output
Fuel
Fuel tank capacity (red level)
Rated continuous operation hours (red level)
Lubricant
Lubricant capacity
Ignition method
Starting method
Dimensions (overall length X overall
width X overall height)
Dry weight

TRANSPORTING / STORAGE

Transporting
CAUTION: Units are heavy. Observe safe lifting procedures when transporting.
WARNING: Contact with a hot engine or exhaust system can cause serious burns or fires.
Storage
Make sure that the generator storage area is free of excessive humidity and dust. Store the generator in dry,
wellventilated area.
WARNING: Contact with a hot engine or exhaust system can cause serious burns or fires.

APPLICATIONS

Power source of electric appliances and tools.

PREPARATION BEFORE OPERATION

Before starting the generator, check the oil and fuel levels. Be sure that the air cleaner is functioning. Follow the
guidelines below when adding oil and fuel.
Downloaded from www.Manualslib.com
Name
Rotating multi-pole field magnet type single-phase AC inverter generator
Before transporting generator, it is important to turn off the engine switch. Keep generator
level at all times to prevent fuel spillage. Fuel vapor or spilled fuel may ignite.
Let the engine and muffler cool before transporting the generator.
Let the engine and muffler cool before storing the generator.
manuals search engine
E10U
Self excitation
Inverter method
50Hz
1050VA
950VA
230V
1.0
100W
12V
8.3A
Grounded outlets
Terminal
Circuit protector
GM82P
Air-cooled 4-cycle OHV gasoline engine
3
80cm (4.9 cu in)
1.8kW (2.4PS)
Non-leaded gasoline for automobiles
3.8L
About 5 hours
API classification class SE or better (10W-30)
0.4L
Transistor type magnet ignition
Recoil method
× ×
400 330 390mm
20kg
Specifications are subject to change without notice.
English
13