On-screen display
The »System« menu
In the
System
menu, you can get various information about the display. Here, you
can also configure the OSD and the LED.
Info
[Function]
OSD Time Out
Off
5 ... 60
OSD Transparency
0 ... 10
OSD Factory reset
[Function]
OSD Language
English
German
Italian
Spanish
French
Russian
OSD Show boot logo
On
Off
LED
Enabled
Disabled
13 · RackConsole-PRO 17HR
Shows software version, software revision, temperature, resolution
and manufacturer of the RackConsole.
Define the time span (default: 30 seconds) after which the OSD is no
longer displayed.
When selecting the option Off, the OSD remains visible until closed by
a user.
Define the degree of OSD transparency by selecting a value
between
0
(covered) and
The default value is 0.
Restore the factory defaults.
Previously saved settings are deleted!
Select the OSD language.
The default language is English.
Select whether to display the G&D logo when starting the display.
The default setting is On.
Select whether you want to enable or disable the status LED.
By default, the status LED is Enabled.
10
(high transparency).