Guntermann & Drunck RackConsole-PRO 17HR Installation Und Bedienung Seite 28

Rack-mounting
9. Screw on the rear panel.
IMPORTANT:
into a
U shape
the additional spacers to mount the rear panel.
You will find these parts in the separate inner bag
of the mounting material.
10.Plug in and lay the cables.
NOTE:
Use the »
VGA signal source.
7 · RackConsole-PRO 17HR
After converting the energy chain
, use the long screws (M6×28) and
DVI-I to DVI-D « or » DVI-I to VGA « adapters to connect a DVI-D or