Buttons - Guntermann & Drunck RackConsole-PRO 17HR Installation Und Bedienung

Buttons

Buttons
Menu Press this button to show the OSD during operation.
Press this button while operating the OSD to move up one level in the OSD
or to exit the OSD.
Select
Press the button inside the OSD to move the cursor down.
Press and hold the button outside the OSD for one second to display the video signal
of the next video input.
Down
Press the button on the top OSD level to move the cursor to the left.
Press the button while an OSD menu option is selected to switch to the 
previous option of the item.
Press the button when a scale is displayed to decrease the displayed value.
Up
Press the button on the top OSD level to move the cursor to the right.
Press the button while an OSD entry with submenu (arrow mark in the right column)
is selected to open the submenu.
Press the button while an OSD menu option is selected to switch to the next option
of the item.
Press the button when a scale is displayed to increase the displayed value.
Press the button (outside the OSD) while a DVI-A video signal is displayed 
to automatically adjust the picture settings.
On/Off
Press this button to turn the RackConsole on or off.
9 · RackConsole-PRO 17HR