The »Display« Menu - Guntermann & Drunck RackConsole-PRO 17HR Installation Und Bedienung

The »Display« menu
In the menu, you can scale the picture format to be displayed. You can also
Display
adjust various settings to display a DVI-A video format.
In addition, you can use the freeze function provided in this menu to freeze the pic-
ture.
NOTE:
You can only select the settings in the
nal is shown on the display.
Zoom
Aspect Ratio

1:1

Fullscreen

Freeze
Off

On

DVI-A  Timing
Info

DVI-A  Autoadjust
[Function]
DVI-A  H Total
[Scale]
DVI-A  H Pos
[Scale]
DVI-A  V Pos
[Scale]
DVI-A  Phase
0 ... 63

Adjust the zoom of the video signal.
Aspect ratio
By default, the option
Additionally you can select between the options
Activate this function to freeze the currently displayed image until
you either stop the function or the video signal is interrupted.
By default, this function is turned Off.
Shows the resolution and refresh rate of the DVI-A video signal.
When this function is called, the RackConsole automatically adjusts
various picture settings to the displayed DVI-A video signal.
Adjust the width of the video signal including horizontal blanking.
The value range of the scale depends on the DVI-A video signal.
Adjust the horizontal position of the picture.
The value range of the scale depends on the DVI-A video signal.
Adjust the vertical position of the picture.
The value range of the scale depends on the DVI-A video signal.
Adjust the phase of the DVI-A video signal.
On-screen display
DVI-A submenu if a DVI-A video sig-
is activated.
1:1
RackConsole-PRO 17HR · 12
and Fullscreen.