Rack-mounting
4. Depending on the rack depth, loosen one to four screws on both rails to adjust the
RackConsole to the rack depth.
5. Position the cage nuts in the rack.
6. Screw the telescopic slides into the rack and align them centrally according to the
dimensions of the rack height unit.
To do this, use the cage nuts, the plastic discs and the M6×16 screws from the enclosed
bag.
NOTE:
Screw the back of the rails only loosely to the rack.
In step 9, you screw the rear panel together with the rear panel.
5 · RackConsole-PRO 17HR