Main Screen - Purmo TempCo Touch E3 Montage- Und Bedienungsantleitung

GENERAL PICTOGRAMS
To return to the main screen.
To return to the previous screen.
The buttons with a red dot require a long press (min
5s).

MAIN SCREEN

1-
Date.
2-
Display the hour or the ambient T° of the room or zone. Make
your choice by pressing on the central part of the screen
3-
Outside sensor temperature.
4-
Screen lock. A long press toggles between locking and
unlocking.
5-
Error flag for the system (RF, limits, alarms, battery
anomalies...). Access the list by pressing on this icon.
6-
The device is working on battery (! only for settings and
pairing).
7-
Room access (active even if the Central is locked to see but
not to change settings).
8-
Main menu.
9-
Holidays mode status.
10
- Boiler status displayed if connected to the Central.
HOUR SETTING
Set the hour and the date.When auto is selected the time and
date will be set via the internet server,you also may select a
time zone according to your region. Auto summer/winter time
can be selected from the menu.
Then press on or
HOUSE CREATION
long press on
Create all the rooms
1. Srcoll over rooms.
2. Current room name.
3. To delete a room (zone).
4. To create or add a room (zone).
5. To change current room (zone) name.
MAIN MENU
Press to go to main menu
1-
Consumption statistics menu.
2-
Language (the flag of the current language is
displayed).
3-
General commands menu.
Use this menu to put all the same devices type in the same
operating mode.
a- To select the heating/cooling device mode for the
installation.
b- To select the ON/OFF devices mode for all the installation.
c- To validate the selections.
4-
Heating/cooling mode management menu.
See section "Heating and cooling control"
5-
User settings menu.
In this menu, you can set:
- Hour, Date.
- Time zone
- Summer-Winter (Manual, Automatic).
- Temperature unit (°C, °F).
- Background Color.
3