Dip Switch Settings - Neat PIR II Benutzerhandbuch

11 Radio test alarm
To check the connection with the paired radio unit
PIR II regularly sends a Radio Test alarm.
There is no LED indication when a Radio Test alarm
is sent.
12 Start-up
At start-up the Operation LED (D2) blinks green for
45 seconds, where-after it goes fixed green for 1
second and then turns off.
However, if battery is low the Operation LED (D2)
blinks red instead of green during the 45 second
start up.
13

DIP switch settings

The settings and functions for the DIP switches are
explained below.
DIP#
1
2
3
4
5
6
7
8
Table 5. DIP switches (1-8) on PCB.
16
Function
Configuration setting
Power save mode
IDA function
IDA, exit alarm delay
IR detection sensitivity
Operation LED after alarm
Detection LED after movement
Disable OFF button/Alarm delay
PIR II User manual - NE41 19003-00 v1.2
ON OFF
PC Local
Power save Static
Yes No
Long Short
Low High
Yes No
Yes No
Yes/No delay No/15 s