Installing Certificates; Version 1: Creating And Activating A Self-Signed Certificate - Guntermann & Drunck Remoteaccess-Gate Installationsanleitung

Initial configuration
3. Enter the following values under
Date:
Time:
4. Click on Save .

Installing certificates

The RemoteAccess-GATE uses TLS 1.3 for encrypted network traffic with connected
clients. When establishing a connection, the device authenticates itself to the client
with a cryptographic certificate.
IMPORTANT:
The device is shipped with a standard certificate. We strongly rec-
ommend replacing the standard certificate with your own certificate!
The device can independently generate a
(CSR). Alternatively, you can load your own certificate into the device.
Request
ADVICE: You can view the details of the active certificate under
. Here, you can also download the certificate and the key.
TLS Certificate

Version 1: Creating and activating a self-signed certificate

IMPORTANT: Before creating a certificate, make sure that the internal clock of the
device is set correctly (see page 9).
A self-signed certificate is the easiest and fastest way to secure the device's network
traffic with an individual certificate.
Due to using a self-signed certificate, your browser and the clients will not trust the
connection by default, because the issuer of the certificate is unknown. After you
save an exception for the publisher in the browser or client, the encrypted connec-
tion can be established.
NOTE: If you want to use a certificate that is accepted by the browser and client
without requiring any exceptions, create a Certificate Signing Request (see below) and
use it to request the certificate creation from a known certificate authority.
10 · G&D RemoteAccess-GATE
User Specified Time
Enter the current date in
endar icon on the right to select the date in the calendar.
Enter the current time in the format
arrow keys to change the individual values.
NOTE: The time is displayed in a 12-hour count. For time
entries in the morning, select the option
in the afternoon
pm
:
YYYY-MM-DD
.
self-signed certificates
format or click the cal-
hh:mm:ss or use the
, for time entries
am
or a
Certificate Signing
Security >